6202ze Bearing-manufacture,factory,supplier from China

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

The structural design of the stud CAM follower needle bearing consists of an end plate integrated into the inner ring (stud) and another inner shoulder ring pressed against the stud. In this design, both ends of the stud have lubrication holes to ensure that the bearing can be fully lubricated during operation. The inner ring is hardened by induction, which can improve the hardness and wear resistance of the inner ring, thus extending the service life of the bearing.

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

This type of bearing is widely used in industrial automatic robots, working machinery and medical facilities, where high rigidity, tightness and high speed are required to ensure accuracy.

Excavator bearing installation and removal methods, should be according to the excavator bearing structure, size and excavator bearing parts with the nature.Installation, disassembly pressure should be directly added to the end face of tight fit excavator bearing stalls circle, not by the excavator bearing rolling elements to transmit pressure, because this will be caused by the excavator bearing work surface indentation, impact excavator bearing normal workeven make excavator bearing damage.

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Railway Axle BearingsAxle bearings: tapered roller bearings, tapered roller bearing boxes, cylindrical roller bearings, spherical roller bearings. Railway axle bearings can be subjected to high shocks and loads. Mounting space is also limited, so in many cases compact, double-row bearings with high load ratings are used.Railway Axle Box BearingAxlebox bearings should have a large load carrying capacity, be able to resist shock vibration, and must have a high life expectancy, safety and reliability, smaller size and quality.

Stamped outer ring needle roller clutch, commonly known as one-way bearing or one-way needle roller bearing,  is a single directional bearing composed of a thin-walled outer ring, cage, spring plate,  and needle roller that is stretched from an alloy sheet. It can be used as a converter, check device,  and overrunning clutch, and is widely used in fitness equipment, cash counting machines, washing machines,  fishing gear, toy cars, and other transmission parts that need to have a reverse stop function.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

There are several types of 7000C (∝=15°), 7000AC (∝=25°) and 7000B(∝=40°). The lock of the bearing is on the outer ring, generally the inner and outer rings can not be separated, and can withstand the combined radial and axial load as well as the axial load in one direction. The ability to bear axial load is determined by the contact Angle, and the contact Angle is large, the ability to bear axial load is high.

Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.

The raceway with the inclination Angle enables the tapered roller bearing to bear the combined radial and axial loads. The greater the Angle between the outer raceway and the bearing center line, the greater the ability to withstand the axial and radial load ratio. The linear contact between the roller and the raceway makes the tapered roller bearing have a great load bearing capacity. This feature and the ability to withstand radial loads, axial loads and both combined loads make tapered roller bearings ideal for many applications.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

There are two main types of bearings widely used in industrial robots: constant cross-section thin-walled bearings and RU cross roller bearings. The bearing of an industrial robot is one of the key components suitable for the joints of industrial robots or the turntables of machining centers, robots, medical devices, measuring instruments, IC manufacturing equipment, etc., and has a wide range of uses.

Tapered roller bearings are widely used in various mechanical fields, such as automobiles, aviation, machine tools, etc., because of its large bearing capacity, high precision, good reliability and other advantages, it has been widely concerned and applied in the industrial field.

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

NSK automotive hub bearing is a key component used to support the rotation of automotive wheels. It uses high-quality bearing steel materials and advanced manufacturing processes to ensure the durability and performance stability of the bearing. NSK automotive hub bearings are usually composed of inner and outer rings, bearing balls (rollers), cages, sealing rings, etc. They can withstand the weight of the vehicle, reduce friction, improve rotation efficiency, and resist vibration and impact forces to ensure safety and stability when the vehicle is running.

Drive pinion: steeply angled tapered roller bearings, which reduce frictional moments and allow for increased rotational speeds.Hub Bearings – Rear Axle: Tapered roller bearings with an optimized internal design to limit edge loads caused by axle deflection and heavy loads.Hub bearing – front axle: Thin angular contact ball bearing improves rigidity in a narrow space.Gearboxes: High performance deep groove ball bearings TMB/TAB for increased service life or downsizing (downsizing) with the same service life as larger bearings.Final reduction planetary gears: There is a large selection of cage

Product Description:Q355B carbon steel coil has high strength and good plasticity, in the field of machinery manufacturing, can be used to manufacture key parts of heavy machinery, such as crane boom, mining machinery wear-resistant parts.

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Miniature Flanged Ball Bearing are easy shape and convenient to use, are the most widely software bearing, normally used to aid radial load. This type of bearings with small friction coefficient, low noise, excessive velocity limit, however is now not capable to endure affect strike, no longer appropriate for a heavy load.

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.