6202 Ball Bearing-manufacture,factory,supplier from China

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

Structure: THK linear bearing is mainly composed of bearing body, ball, cage, guide rail and other parts. The bearing body is usually made of high-strength alloy steel, and the cage is made of high-wear-resistant materials. The ball is to play a role in reducing friction and support.Working principle: The working principle of THK linear bearing is to make the ball slide smoothly on the guide rail through the friction of the bearing body and the guide rail, so as to achieve the linear movement of the workpiece or equipment.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

FAG is one of the world's leading bearing manufacturers, whose deep groove ball bearings are widely used in various mechanical equipment and industrial fields. Deep groove ball bearing is a common rolling bearing, with many advantages, such as large bearing capacity, low friction, high speed characteristics.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

Product Description:6063 aluminum coils are used in the manufacture of train cars for components such as window frames, door frames, interior armrests and trim strips. Its corrosion resistance can be adapted to the environment of long-term train operation, including different climatic conditions and frequent cleaning operations.

Bearing performance: The bearing capacity of cross roller bearings is large, suitable for high-speed and high-load applications. Due to the special arrangement of rollers, the bearing can share part of the load when bearing radial and axial loads, which improves the bearing capacity and stability.

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

During use, CAM bearings need to pay attention to maintenance and maintenance to ensure their normal operation and extend their service life. It is important to keep the camshaft surface clean to avoid dust and impurities entering the bearing parts. Regular oil changes are also essential to maintain good lubrication between the camshaft and the bearing.The role of CAM bearings in the engine is crucial. A high quality CAM bearing can effectively reduce friction and wear, improve engine performance and efficiency.

Construction machinery bearing is a mechanical component used to support and turn rotating parts. In construction machinery, bearings usually carry high-speed rotating parts, such as engines, transmission systems, etc. Bearings usually consist of an inner ring, an outer ring, a rolling element and a retainer.There are many types of construction machinery bearings, including rolling bearings and plain bearings. Rolling bearings reduce friction and improve rotation efficiency by rolling rolling elements (such as spheres, rollers or cylinders) between the inner and outer rings.

The important measure to reduce automobile fuel consumption is to design low friction torque hub bearings, and the main factors affecting the bearing friction torque is the type of bearing and preload, and the bearing seal accounted for a large proportion of the friction torque components. Therefore, improving the seal design to reduce the friction torque can significantly improve the performance of hub bearings.

THK was founded in 1971 in Meguro-ku, Tokyo, Japan, and was originally named Toho Seiko Co., Ltd. It was later renamed THK CO.,LTD. "THK" stands for "Toughness", "High Quality" and "Know-how".THK linear bearings are a linear motion system produced at low cost for use with cylindrical shafts with unlimited travel. Because the bearing ball is in point contact with the shaft, the load is small.

High Rigidity Type Crossed Roller Bearing V has a solid one-piece construction for both inner and outer rings. Therefore, high accuracy and high rigidity are achieved, and mounting errors can be minimized. As separators are incorporated between the cylindrical rollers for smooth rotation, these bearings are suitable for applications where rotation speed is comparatively high.

Product Description:6201 aluminum Angle rod can be used to manufacture some parts that have requirements for strength and conductivity, such as the support of the motor, the frame of the electrical control cabinet, etc.

The raceway with the inclination Angle enables the tapered roller bearing to bear the combined radial and axial loads. The greater the Angle between the outer raceway and the bearing center line, the greater the ability to withstand the axial and radial load ratio. The linear contact between the roller and the raceway makes the tapered roller bearing have a great load bearing capacity. This feature and the ability to withstand radial loads, axial loads and both combined loads make tapered roller bearings ideal for many applications.

Tapered roller bearings are a type of bearing widely used in industrial fields. In the industry, tapered roller bearings are mainly used in machinery and automobiles, such as pharmaceutical equipment, hydraulic machinery, machine tools, automotive differentials, etc. These mechanical equipment are used in a mix of dynamic and static loads, there are different friction factors in the environment.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.