6200 Deep Groove Ball Bearings-manufacture,factory,supplier from China

 Deep Groove Ball Bearings Deep Groove Ball Bearings are highly versatile and extensively used in various industries due to their ability to support higher radial loads and moderate axial loads.

First of all, one of the characteristics of FAG deep groove ball bearings is a simple structure, consisting of an outer ring, an inner ring, a steel ball and a cage. This simple structure makes the installation and maintenance of deep groove ball bearings more convenient and fast.Secondly, the bearing capacity of FAG deep groove ball bearings is large and can withstand both radial and axial loads.

NTN deep groove ball bearing is a common rolling bearing, widely used in various mechanical equipment and industrial fields. The deep groove ball bearing consists of an inner ring, an outer ring, a ball and a cage, and is designed to withstand radial and axial loads and maintain stable operation at high speeds. The structure, performance and application characteristics of NTN deep groove ball bearings will be introduced in detail below.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types  1 Type: Single row deep groove ball bearings,Stainless steel deep groove ball bearings,Single row deep groove ball bearings with filling slots,Double row deep groove ball bearings 2.

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

Double row deep groove ball bearing:Design: With two balls, these bearings can handle a higher load capacity than a single row of bearings.Application: They are suitable for bearing arrangements where the bearing capacity of a single row of bearings is insufficient, for example in heavy industry applications.Features: Double-row bearings are slightly wider than single-row bearings, but offer better load distribution and improved reliability for demanding applications.Both single-row and double-row boring deep groove ball bearings are designed with high-quality materials to ensure durability an

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

FAG bearings-Deep groove ball bearings are the most popular of all ball bearing types because they have a variety of seals, dust caps, and stop ring arrangements to choose from. The groove of the bearing ferrule is an arc, slightly larger than the radius ball of the bearing ring.FAG bearings are a very famous brand.

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

The advantages of UBC tapered roller bearings include large bearing capacity, high rotation accuracy, wear resistance, smooth operation and so on. The inner ring and outer ring can adjust the axial position by adjusting the bearing clearance, so that it is more convenient in the installation and use process.

It uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

The working principle of needle roller bearings is to use rolling friction to reduce friction and resistance. When the bearing is subjected to axial or radial load, the needle roller rolls between the inner and outer rings, thereby reducing friction and resistance.

According to the different requirements of bearings and bearing seats, the classification of bearing seats is not exactly the same, and it is necessary to carefully check the selection according to the design when using.1 Classification according to the shape of the bearing seat:1.1 Outer spherical bearing with seat, also known as bearing unit (SKF). When there is no bearing, it is called the outer spherical bearing seat. 1.1.1.1 The outer spherical bearing seat is divided into 200 series according to the bearing series. The 500 series. The 300 Series. The 600 Series.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

As an important mechanical transmission element, rolling bearing with seat plays a key role in various fields.

The popular riding machine for a stud kind cam follower is a slot, for use with a flat head screwdriver. However, hex sockets are accessible for greater torquing ability, which is specifically beneficial for eccentric cam followers and these used in blind holes.

Product Description:Q195 carbon steel is mainly composed of iron (Fe) and a small amount of carbon (C), and the elongation is high, up to about 33% (standard distance 50mm).

Product Description:Due to its good molding performance and beautiful metal appearance, the 1/16 inch aluminum plate can be used to manufacture the shell of various electronic devices, such as tablets, laptops, mobile phones, and so on.