60*130*31mm Cylinder Roller Bearing-manufacture,factory,supplier from China

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

The raceway with the inclination Angle enables the tapered roller bearing to bear the combined radial and axial loads. The greater the Angle between the outer raceway and the bearing center line, the greater the ability to withstand the axial and radial load ratio. The linear contact between the roller and the raceway makes the tapered roller bearing have a great load bearing capacity. This feature and the ability to withstand radial loads, axial loads and both combined loads make tapered roller bearings ideal for many applications.

Structural features: The roller inside the cross roller bearing is combined in a cross arrangement, which makes the bearing able to withstand both radial and axial loads. There is a certain gap between the inner and outer rings, which can make the bearing maintain high rigidity when it is subjected to high torque load, and also has good rotation accuracy and stability. The design of the seal ring and cage of the cross roller bearing is also very important, which can effectively prevent dust and foreign matter from entering the bearing interior and extend its service life.

Cross roller bearing is a special kind of rolling bearing, which is widely used in mechanical field. It is designed to meet large size equipment that needs to operate under the requirements of high load capacity, high rigidity and high rotational accuracy. The cross roller bearing is composed of inner and outer rings, rollers, sealing rings and cages, and its structural advantages are that it can withstand both radial and axial loads, with high torque rigidity and running accuracy. The following will introduce the characteristics and applications of cross roller bearings in detail.

Iko tapered roller bearings have high load bearing capacity and wear resistance. Because of the conical roller design, the bearing can share the load evenly when bearing heavy loads, and the bearing capacity is effectively improved. At the same time, the use of high-quality materials and advanced manufacturing technology to ensure the bearing's wear resistance and extend the service life.Iko tapered roller bearings have high rotation accuracy and running stability.

Iko is a well-known company specializing in the production of various types of bearing products, and its tapered roller bearings are one of its product series. Tapered roller bearing is a common type of bearing, mainly used in mechanical transmission fields, such as automotive, aerospace, engineering machinery and other fields.Iko tapered roller bearings have the following characteristics: First, the structural design is reasonable, mainly composed of inner ring, outer ring, roller and cage.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

Conical roller bearing is a common mechanical transmission element, mainly used to carry axial and radial loads and can achieve rotation and swing motion. It is mainly composed of an inner ring, an outer ring, a roller and a cage, with large carrying capacity, low friction, suitable for high-speed rotation and high accuracy requirements, so it is widely used in construction machinery, automotive, aerospace, mining machinery, metallurgical equipment and other fields.

The advantages of UBC tapered roller bearings include large bearing capacity, high rotation accuracy, wear resistance, smooth operation and so on. The inner ring and outer ring can adjust the axial position by adjusting the bearing clearance, so that it is more convenient in the installation and use process.

Applications: Cross roller bearings are widely used in many fields, including machine tools, engineering machinery, medical equipment, food packaging machinery, etc. On machine tools, cross roller bearings are often used to support the spindle and the turntable to ensure the high-speed and high-load operation of the equipment.

The working principle of Koyo tapered roller bearings is to use the rolling body to roll between the inner and outer rings, thereby reducing the contact area and reducing friction resistance. When the external radial or axial load is applied, the roller will bear the load between the inner and outer rings to achieve the function of supporting and transferring the load of the bearing. Rollers are designed so that they can equally share load when rotating, reduce local stress and extend service life.

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

Koyo tapered roller bearing is a common rolling bearing, usually used in automobiles, mechanical equipment, wind turbines and other fields.

One of the largest aspects of the needle curler bearing is the sketch of the needle roller. The needle roller has a smaller diameter than different sorts of rolling elements, so it can obtain a greater load carrying capability in a constrained space.

Tapered roller bearings are suitable for bearing radial loads, unidirectional axial loads and radial and axial combined loads. The axial load capacity of tapered roller bearings depends on the contact Angle α, that is, the Angle of the outer ring raceway, the greater the contact Angle α, the greater the axial load capacity. Generally tapered roller bearings do not allow Angle errors, but the surface of the roller and raceway can be specially designed to allow 2'~4' Angle errors.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

As one of the leading thrust ball bearing manufacturers in China, we can provide standard thrust ball bearings, stainless steel thrust ball bearings, ceramic thrust ball bearings, one-way thrust ball bearings, thrust angular contact ball bearing, axial ball thrust bearings, miniature thrust ball bearings Bearings, banded roller thrust bearings, deep groove ball thrust bearing, bearing dimensions support metric and inches. Various sizes can also be customized according to customer needs.

Agricultural engineering involves a wide range of machinery, equipment and tools, including tillers, tractors, rake machines, balers and high-power harvesting machinery such as green feed harvesters and combine harvesters. A variety of different mechanical equipment, also need to face the harsh working environment. The dusty conditions in summer have very high requirements for bearing seals. In addition, farming machinery bearings are usually integrated with flanged housings to simplify assembly.

Product Description:3A21 aluminum plate has good heat conduction performance and can effectively transfer heat.

Structure: Railway bearings are generally composed of inner ring, outer ring, rolling body and cage and other components. The inner ring is directly connected to the shaft, the outer ring is installed on the wheel, and the rolling body is located between the inner and outer rings, which reduces friction through rolling and maintains the normal operation of the bearing.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Agricultural bearings refer to the bearing products used in agricultural machinery and equipment, which carry the rotating parts of various agricultural equipment in the working process, and ensure its smooth operation and increase the life of mechanical equipment.