6010 Bearing Price-manufacture,factory,supplier from China

Product Description:As a mold material, 7075 aluminum alloy coil can be used to manufacture high-precision, high-strength die-casting molds, injection molds, etc.

Product Description:The Q215 I Beam has an "I" form in pass section, consisting of the top and decrease parallel flanges and the internet connecting the flanges, comparable in structure to the capital English letter "I".

Product Description:Carbon steel coil is commonly used in the manufacture of stamping die and forging die.

Product Description:ST14 Galvanized Steel Plate, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandardGr

Product Description:Often used in the manufacture of high-strength machine parts, such as drive shaft, gear, crankshaft, etc., these parts need to withstand large loads and stresses in mechanical equipment, 2014 aluminum plate's high strength and good processing performance can meet its use requirements.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndust

Product Description:In wind farms, it is often used to manufacture the tower structure of wind power towers.

Product Description:For example, the swing arm, connecting rod and other chassis parts of the suspension system, the use of 7A05 aluminum alloy profiles can reduce the sprung mass, improve the handling performance and driving comfort of the car, and its high strength can also ensure the reliability of the chassis parts in complex road conditions.Alloy Grade & ConditionThermal Expansion Coefficient (20 - 100℃) [μm/m·k]Melting Range [℃]Electrical Conductivity at 20℃ (%IACS)Resistivity at 20℃ [Ωmm²/m]Density at 20℃ [g/cm³]2024 - T35123.2500 - 635300.0582.825052 - H11223.8607 - 650350.0502.725

Product Description:2124 aluminum coil alloy factors are mostly copper, etc., after suitable warmth cure and processing technology, its tensile electricity ≥390MPa, conditional yield power ≥295MPa, with excessive bearing ability and deformation resistance, appropriate for events with excessive power requirements.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 60

Product Description:In the automobile chassis, 6061 aluminum T-bar can be used as the material of chassis beam, longitudinal beam and other structural parts.

Product Description:Galvanized is the key surface treatment of the product, hot dip galvanized layer can effectively prevent steel rust and corrosion, improve the durability of the anti-skid in wet, corrosive environment. There are a variety of thicknesses to choose from, such as the common thickness range from 2mm-8mm to meet different load requirements.

Forklift Mast Roller Bearing Precautions1, To keep the forklift bearing its surroundings clean Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.4,To prevent the corrosion of forklift bearings Handle forklift

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:DX52D+Z Galvanized Steel Plate is a premium-grade steel product that combines the strength of cold-rolled steel with the protective properties of zinc coating. This high-performance material is engineered for applications demanding both structural integrity and resistance to corrosion.

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Product Description:The 6063 Aluminum Pipe is a medium-strength alloy with excellent extrudability, corrosion resistance, and surface finish.

Product Description:In some small mechanical equipment, 5454 aluminum alloy Angle can be used to manufacture some non-critical structural parts and connecting parts, such as small brackets, fixture corner structure, etc.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Product Description:In electricity engineering, 6351 aluminum tube is frequently used as the cloth of cable tray, has precise electrical conductivity and corrosion resistance, can supply dependable assist and safety for the cable, however additionally handy to lay and keep the cable.Product Specifications:Product NameAluminum Pipe TubeStandardAISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etcWall Thickness0.5-150 mm or Customized according to customer requirementsOuter Diameter2-2500mm or Customiz

Product Description:Due to the high strength and light weight of 5056 aluminum plate, it can reduce the weight of the aircraft and improve fuel efficiency while ensuring the structural strength of the aircraft, so it is often used in the manufacture of key structural components such as wings, fuselage frames and landing gear of aircraft.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollA

Product Description:Used for the foremost body shape of giant industrial plants, such as metal plants, cement plants, chemical plant workshops. Due to the excessive power of Q275 steel, it can stand up to heavy crane loads, tools weight and roof gadget weight.

Product Description:Galvanized diamond plate is formed by a special pressing process. The size and shape of the diamond can vary according to the specific product specifications. The diamond pattern gives the plate a three-dimensional feeling and excellent anti-slip performance. Suitable for use in wet or oily environments, such as the ground of industrial plants, stair treads, vehicle foot pedals and other application scenarios。

Product Description:In the keel machine of the constructing curtain wall, the Q420GJ channel metal can supply secure aid for the curtain wall panel to make sure the security of the curtain wall underneath the motion of wind load and self-weight.

Product Description:Q420FTC Steel Plate, forged from quality materials, has a 420MPa yield strength. Ideal for large - scale construction, it withstands heavy loads. Its “FTC” features might include corrosion or heat resistance. With good formability and weldability, it's easy to shape and join. Stringent quality control ensures top - notch quality.

Product Description:It is used in the helping and connecting components of railway bridge, platform cover and different structures.