6004 Ball Bearing-manufacture,factory,supplier from China

I.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Structure: THK linear bearing is mainly composed of bearing body, ball, cage, guide rail and other parts. The bearing body is usually made of high-strength alloy steel, and the cage is made of high-wear-resistant materials. The ball is to play a role in reducing friction and support.Working principle: The working principle of THK linear bearing is to make the ball slide smoothly on the guide rail through the friction of the bearing body and the guide rail, so as to achieve the linear movement of the workpiece or equipment.

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:Polyester coated steel coil is a kind of steel coil which is pre-coated with polyester coating on the surface of galvanized steel plate by rolling coating, etc.

Product Description:In the manufacturing of auto parts, many body structure parts and interior trim parts of different shapes can be processed with DX51D steel, which can be accurately formed in the stamping process, and maintain good surface quality, reduce subsequent dressing procedures, and improve production efficiency.Full cold galvanizing process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality ins

The sealing and protection of truck bearings are also very important. Trucks often drive in a variety of harsh road conditions, bearing in dust, water vapor and chemicals and other corrosive environment. In order to extend the life of the bearing, it is necessary to take into account the sealing property in the design, and select the appropriate sealing material and structure.Truck bearings also have certain requirements on installation and maintenance. Proper installation and proper lubrication are the keys to ensure the normal operation of truck bearings.

Single course thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they need to be supported so that all balls can be evenly loaded. Bearings lift the axial load solely in one direction. They are no longer capable to lift radial forces.Double path thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces.

Product Description:As a mold material, 7075 aluminum alloy coil can be used to manufacture high-precision, high-strength die-casting molds, injection molds, etc.

We are an authorized dealer of KOYO bearings. KOYO is a leading manufacturer of almost all types of bearings. We offer a full range of KOYO bearings at very competitive prices, including koyo wheel bearings, koyo ball bearings, koyo needle bearings, koyo roller bearings, koyo thrust bearings and koyo eccentric bearings.

Construction machinery bearing is a mechanical component used to support and turn rotating parts. In construction machinery, bearings usually carry high-speed rotating parts, such as engines, transmission systems, etc. Bearings usually consist of an inner ring, an outer ring, a rolling element and a retainer.There are many types of construction machinery bearings, including rolling bearings and plain bearings. Rolling bearings reduce friction and improve rotation efficiency by rolling rolling elements (such as spheres, rollers or cylinders) between the inner and outer rings.

UCF210-113D1 Pillow Block Bearing / Pillow Housings: Supplied with a fully sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted.

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

Product Description:Thickness of 1/2 inch (about 12.7 mm), in the field of industrial machinery manufacturing, often used to manufacture large mechanical equipment shell, work platform, etc., to protect the internal mechanical structure and provide a stable working surface.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustrial Pure Aluminum(1050,1050A,1060,

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

Because the bearing ball is in contact with the bearing point, the load is small.

Product Description:12-foot galvanized roofing panels have unique advantages in agricultural applications due to their longer dimensions.