35 * 72 * 17 Bearing-manufacture,factory,supplier from China

Tapered roller bearings are suitable for bearing radial loads, unidirectional axial loads and radial and axial combined loads. The axial load capacity of tapered roller bearings depends on the contact Angle α, that is, the Angle of the outer ring raceway, the greater the contact Angle α, the greater the axial load capacity. Generally tapered roller bearings do not allow Angle errors, but the surface of the roller and raceway can be specially designed to allow 2'~4' Angle errors.

Tapered roller bearings are a type of bearing widely used in industrial fields. In the industry, tapered roller bearings are mainly used in machinery and automobiles, such as pharmaceutical equipment, hydraulic machinery, machine tools, automotive differentials, etc. These mechanical equipment are used in a mix of dynamic and static loads, there are different friction factors in the environment.

Features: (1) High strength and wear resistance: wheel bearings are usually made of high-strength alloy steel or stainless steel, with good wear resistance and pressure resistance, can withstand the high load and friction when the vehicle is running; (2) Good sealing: the seals in the hub bearing structure can effectively prevent external dust, water, impurities, etc.

Forklift Mast Roller Bearing Precautions1, To keep the forklift bearing its surroundings clean Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.4,To prevent the corrosion of forklift bearings Handle forklift

Linear bearing is a linear motion system used for linear stroke and cylindrical shaft.

Linear motion bearing is a linear motion system produced at a low cost for use with unlimited travel and cylindrical shafts. Because the bearing ball is in point contact with the shaft, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision. Linear motion bearing metric and Imperial series: Standard type (LM/LME/LMB... UU), adjustable (LM/LME... UUAJ), Open (LM/LME... UUOP); Extended (LM/LME... LUU); Flange type (LMF/LMK/LMH... UU, LMEF/LMEK... UU), flange extension (LMF/LMK/LMH... LUU, LMEF/LMEK...

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

As one of the leading thrust ball bearing manufacturers in China, we can provide standard thrust ball bearings, stainless steel thrust ball bearings, ceramic thrust ball bearings, one-way thrust ball bearings, thrust angular contact ball bearing, axial ball thrust bearings, miniature thrust ball bearings Bearings, banded roller thrust bearings, deep groove ball thrust bearing, bearing dimensions support metric and inches. Various sizes can also be customized according to customer needs.

IKO is a well-known manufacturer specializing in the production of various types of needle roller bearings, and its needle roller bearing products enjoy a high reputation around the world. IKO's needle roller bearings have a variety of excellent characteristics, and the following will describe the characteristics and applications of its needle roller bearings in detail.First of all, IKO's needle roller bearings are made of high-quality materials, have extremely high wear resistance and corrosion resistance, and can operate stably in a variety of harsh environments.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Product Description:Corrugated galvanized metal plate has a unique corrugated structure, the common corrugated shapes include V, U, trapezoid and so on.

Because the bearing ball is in contact with the bearing point, the load is small.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Flange bearing is a kind of bearing widely used in various mechanical equipment, it has the following characteristics:Simple structure: flange bearings are usually composed of an inner ring, an outer ring, a rolling element and a cage, which is simple in structure and relatively easy to install and maintain.High load capacity: Flange bearings usually use spherical or tapered rollers and other rolling elements, with high load capacity and anti-fatigue characteristics.Self-positioning: Flange bearings can allow a certain degree of deflection and axial displacement during installation, and self-p

Product Description:4/8 galvanized steel plate is a half-inch galvanized steel plate, which has high yield strength and tensile strength, and can withstand large tensile, compression and bending forces and is not easy to deformation.

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

Railway bearing is an important component used to support and guide the rotation of railway vehicle axle, which bears the weight of the train and the force generated during operation, and can ensure the smooth operation of the train. Railway bearings play a vital role in railway transportation, and their quality and performance directly affect the safety and efficiency of trains. Railway bearing is an indispensable component in railway transportation, its structure is firm, reliable quality, wear-resistant and durable, to ensure the safety, stability and efficient operation of the train.

The main features of rotary support bearings include high bearing capacity, fast speed, small friction, wear resistance, simple structure, easy installation and so on. It can withstand large axial and radial loads, while having high rigidity and accuracy, suitable for high-speed rotation and precision positioning requirements. Different types of rotary support bearings have differences in structural form and working principle, such as four-point contact ball type, two-way thrust ball type, cross roller type, tapered roller type and so on.

Heavy goods vehicles are short for heavy trucks, and the working environment of heavy trucks is more severe and the load is greater than that of small household cars.

Product Description:The 1070 Aluminum Pipe is a high-purity aluminum alloy, known for its exceptional properties that make it a preferred choice in various industries, including construction, aerospace, and electronics.

Structure: Railway bearings are generally composed of inner ring, outer ring, rolling body and cage and other components. The inner ring is directly connected to the shaft, the outer ring is installed on the wheel, and the rolling body is located between the inner and outer rings, which reduces friction through rolling and maintains the normal operation of the bearing.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.