3316 Bearing-manufacture,factory,supplier from China

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand

Advantages: The insulated bearing has good insulation performance, which can effectively isolate the external environment, improve the service life and stability of the bearing, and effectively avoid damage and failure caused by current conduction.Installation precautions: When installing insulated bearings, it is necessary to pay attention to keep bearings clean, lubricated and correctly positioned to ensure their normal operation and service life.

Bearing unit includes1. Double row angular contact ball bearings, from automotive hub bearings series a high load capacity, high roll stiffness, double sealCorrosion protection machined bearing housing2. Threaded pin with positioning surface3. Lock washer4. There are high-performance three-lip box seals on both sides of the bearing to prevent pollution.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

(1)Linear motion bearing is a kind of low-cost metal for producing linear motion system, which is used for infinite stroke cylindrical shaft.. Because point contact ball bearing with shaft, so using the load is small.  (2) the flange linear bearing can be divided into: round flange type, method type, elliptical flange type, guided round flange, guiding method, guide the elliptical flange type, extended round flange type.(3)According to the specification is divided into two series of LM and LME series.

Bearing capacity: NTN angular contact bearings have high bearing capacity and can withstand large radial and axial loads. In the process of use, the axial load of the bearing will cause the contact pressure between the inner and outer rings to increase, so it is necessary to choose the appropriate contact Angle to improve the bearing capacity.Rotation accuracy: NTN angular contact bearings have high rotation accuracy, which can ensure that the mechanical equipment has stable rotation performance during operation.

Product Description:There are various kinds of color coated steel coil coatings, common polyester (PE), silicon modified polyester (SMP), high durability polyester (HDP) and polyvinylidene fluoride (PVDF) and so on.

Iko tapered roller bearings have high load bearing capacity and wear resistance. Because of the conical roller design, the bearing can share the load evenly when bearing heavy loads, and the bearing capacity is effectively improved. At the same time, the use of high-quality materials and advanced manufacturing technology to ensure the bearing's wear resistance and extend the service life.Iko tapered roller bearings have high rotation accuracy and running stability.

Because the bearing ball is in contact with the bearing point, the load is small.

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

First, the inner and outer rings of flange bearings are usually made of high-quality steel after heat treatment to improve their hardness and wear resistance. The inner ring is a component mounted on the shaft, and the outer ring is fixed on the seat hole. The two components are connected and supported by a rolling element and a cage.The rolling body is a very important part of the bearing, usually made of steel, by the different shape of the rolling body can be divided into rolling son, needle roller, ball and roller.

Product Description:The quarter-inch galvanized steel plate is based on high-quality steel, usually low or medium carbon steel.

Product Description:Galvanized diamond plate is formed by a special pressing process. The size and shape of the diamond can vary according to the specific product specifications. The diamond pattern gives the plate a three-dimensional feeling and excellent anti-slip performance. Suitable for use in wet or oily environments, such as the ground of industrial plants, stair treads, vehicle foot pedals and other application scenarios。

In rolling bearings, the bearing ring is separated by a rolling unit (rolling element), and in slide guidance systems, the movable part slides on a static guide rail or shaft. Depending on the type of track system, the sliding layer is on movable or rigid components. The lubricating oil is embedded in the sliding layer to achieve lubrication. INA linear plain bearing is a linear positioning bearing with infinite stroke length.

Construction machinery bearings are widely used in various products. The following are some common construction machinery products and their bearing applications:Excavators: Excavators are heavy construction machinery used to excavate earth, stone or other materials, which cover a variety of working conditions and load requirements. Roller bearings or plain bearings that work at high loads and high speeds are usually used on excavators.Bulldozers: Bulldozers are used to bulldoze land, fill earth or push other materials, and need to withstand a large pushing force.

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Insulating materials: insulated bearings are usually made of insulating materials, such as ceramics or special alloys, whose insulation properties can effectively prevent the current from being transmitted through the bearing to other components and play a protective role.Application: insulated bearings are widely used in electrical equipment, motors, generators, frequency converters, wind turbines, electric vehicles and other fields, especially suitable for occasions that need to prevent current conduction.

High quality: UBC bearings are made of high quality materials and have undergone strict quality control and testing to ensure reliable product quality.High precision: UBC bearings use advanced production technology and precision machining technology, with precise size and high accuracy, to ensure stable performance.Strong durability: UBC bearings have excellent wear resistance and corrosion resistance, and can operate stably in harsh environments for a long time.Low noise: UBC bearing has been carefully designed and optimized, with low noise and low vibration characteristics, which can reduce

The insulated bearing is a specially designed bearing whose internal structure can effectively isolate the external environment and prevent conductive and conductive heat. Insulated bearings are usually used in special industrial environments or in equipment requiring special protection.Structure composition: The insulated bearing is composed of an inner ring, an outer ring, a rolling body, a cage and a seal.

Slewing bearing has four series of toothless, external and internal toothed four-point contact ball bearings, double row angular contact ball bearings cross cylindrical roller bearings, cross tapered roller bearings and three row cylindrical roller composite bearings, of which four-point contact ball bearings have higher static load capacity, cross cylindrical roller has higher dynamic load capacity, The pre-interference of cross-tapered roller bearing can make the bearing have greater support rigidity and rotation accuracy.

Angular contact ball bearing has high limit rotational speed, they can carry radial load and axial load simultaneously, they can also withstand purely radial load. The axial load carrying capacity depends on the magnitude of contact angle and increases with increasing contact angle. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.Single row angular contact ball bearings can carry axial load acting in one direction only.

Product Description:1060 aluminum rods are used in automobile body structural parts, engine parts, radiators, air conditioning system components, body decoration strips and so on.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342