306493AA Deep Groove Ball Bearings-manufacture,factory,supplier from China

Double row deep groove ball bearing:Design: With two balls, these bearings can handle a higher load capacity than a single row of bearings.Application: They are suitable for bearing arrangements where the bearing capacity of a single row of bearings is insufficient, for example in heavy industry applications.Features: Double-row bearings are slightly wider than single-row bearings, but offer better load distribution and improved reliability for demanding applications.Both single-row and double-row boring deep groove ball bearings are designed with high-quality materials to ensure durability an

 Deep Groove Ball Bearings Deep Groove Ball Bearings are highly versatile and extensively used in various industries due to their ability to support higher radial loads and moderate axial loads.

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types  1 Type: Single row deep groove ball bearings,Stainless steel deep groove ball bearings,Single row deep groove ball bearings with filling slots,Double row deep groove ball bearings 2.

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

FAG bearings-Deep groove ball bearings are the most popular of all ball bearing types because they have a variety of seals, dust caps, and stop ring arrangements to choose from. The groove of the bearing ferrule is an arc, slightly larger than the radius ball of the bearing ring.FAG bearings are a very famous brand.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

NTN deep groove ball bearing is a common rolling bearing, widely used in various mechanical equipment and industrial fields. The deep groove ball bearing consists of an inner ring, an outer ring, a ball and a cage, and is designed to withstand radial and axial loads and maintain stable operation at high speeds. The structure, performance and application characteristics of NTN deep groove ball bearings will be introduced in detail below.

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

First of all, one of the characteristics of FAG deep groove ball bearings is a simple structure, consisting of an outer ring, an inner ring, a steel ball and a cage. This simple structure makes the installation and maintenance of deep groove ball bearings more convenient and fast.Secondly, the bearing capacity of FAG deep groove ball bearings is large and can withstand both radial and axial loads.

Performance characteristics:High load capacity: NTN deep groove ball bearings can withstand large radial and axial loads, suitable for a variety of mechanical equipment working conditions.High speed: the bearing structure is reasonable, the friction is small, can adapt to high-speed operation, to ensure the stability of the machine equipment.Low noise: NTN deep groove ball bearing manufacturing precision, smooth internal processing, smooth running, low noise.Long life: The use of high-quality bearing steel and excellent heat treatment process, with a long service life and good wear resistance.

The outer diameter (OD) of the cam follower (stud or yoke) can be the standard cylindrical shape or be crowned. Crowned cam followers are used to keep the load evenly distributed if it deflects or if there is any misalignment between the follower and the followed surface. They are also used in turntable type applications to reduce skidding. Crowned followers can compensate for up to 0.5° of misalignment, while a cylindrical OD can only tolerate 0.06°. The only disadvantage is that they cannot bear as much load because of higher stresses.

Bearing unit includes1. Double row angular contact ball bearings, from automotive hub bearings series a high load capacity, high roll stiffness, double sealCorrosion protection machined bearing housing2. Threaded pin with positioning surface3. Lock washer4. There are high-performance three-lip box seals on both sides of the bearing to prevent pollution.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Product Description:In automation equipment, such as the shell of the robot, the panel of the industrial automation control cabinet, etc., the application of 3003 aluminum alloy coil can improve the beauty and durability of the equipment, while reducing the overall weight of the equipment, and facilitate the installation and movement of the equipment.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T f

The outer ring double guard (or double lock ring) with cage needle roller bearing NA, NKI type, can be installed respectively inner ring and outer ring (with lock ring, a full set of needle roller and cage), high speed, divided into single and double row two. Such needle roller bearings with inner rings may be used if the shaft cannot be used as a raceway, i.e.

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

"Introducing our premium angular bearing, engineered for unparalleled performance in demanding industrial settings. These bearings exhibit exceptional load-carrying capacity, ideal for heavy-duty applications requiring precision and reliability. Their high-speed operation and precision angular contact design ensure superior axial and radial load handling, maintainingstability and accuracy even under challenging conditions.Crafted with advanced materials and cutting-edge raceway design, these bearings offer enhanced rigidity, crucial for heavyload-bearing scenarios.

Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or dynamic loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error.Self-aligning roller bearings are divided into two different structures according to the roller cross section shape: symmetrical spherical roller bearings and asymmetric spherical roller bearings.

Product Description:S350GD Galvanized Steel Coils are premium-grade steel products, characterized by their enhanced formability and structural integrity. These coils are specifically designed for applications requiring high tensile strength and resistance to environmental corrosion.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat