30205 P6 Bearing-manufacture,factory,supplier from China

Product Description:Due to its high strength and good fatigue resistance, 2014A aluminum alloy Angle is often used to manufacture aircraft fuselage frame, wing skeleton and other important structural components, which can effectively reduce the weight of the aircraft and improve flight performance while ensuring the structural strength and stability of the aircraft.Product Specifications:country of originChinaannealingT3-T8applicationDecorationsshapesquareWhether alloyNon Alloymodelaluminium productbrandXINDONGYUProcessing servicescuttingMaterials and TemperingAlloy 6063-T5/T6appAluminum profi

Product Description:The density of aluminum is about one-third of that of steel, and the same volume of aluminum profiles is lighter in weight, easy to handle, install and use, and has obvious advantages in some areas with strict requirements for weight, such as aerospace and automobile manufacturing.Alloy Grade & ConditionThermal Expansion Coefficient (20 - 100℃) [μm/m·k]Melting Range [℃]Electrical Conductivity at 20℃ (%IACS)Resistivity at 20℃ [Ωmm²/m]Density at 20℃ [g/cm³]2024 - T35123.2500 - 635300.0582.825052 - H11223.8607 - 650350.0502.725083 - H11223.4570 - 640290.0592.726061 - T6512

Product Description:In some small buildings with relatively low load bearing requirements, temporary buildings or non-main load-bearing structures of buildings, it can be used as beams, columns and other supporting components.

Product Description:The Q420GJ(C/D/E) Steel Angle is used for large billboards on highways, the frame of toll stations and other structures, which can withstand loads such as wind and its own weight, and maintain good performance in different seasons (including cold seasons).country of originChinaWhether alloynon-alloyDelivery date8-14 daysbrandXINDONGYUmodelAngle SteelapplicationRoof beams, bridges, transmission towers, etc.Processing servicesBending, welding, punching, uncoiling, cuttingProduct nameAngle steelMaterialQ235B/Q355B/SS400/SS490/ST52/Q390B/Q420B/S235JR/S275JR/S355JRthickness3-24m

Product Description:It is used to manufacture the frame of shading facilities such as building sunshades and shutters.

Product Description:Usually the use of roll forming process. The galvanized metal plate is progressively pressed into a roof plate form with a positive crest and trough via a sequence of rollers with a precise shape, and the frequent waveforms are corrugated, trapezoid and so on.

Product Description:Used for the foremost body shape of giant industrial plants, such as metal plants, cement plants, chemical plant workshops. Due to the excessive power of Q275 steel, it can stand up to heavy crane loads, tools weight and roof gadget weight.

Product Description:In automation equipment, such as the shell of the robot, the panel of the industrial automation control cabinet, etc., the application of 3003 aluminum alloy coil can improve the beauty and durability of the equipment, while reducing the overall weight of the equipment, and facilitate the installation and movement of the equipment.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T f

Product Description:It has been used in the physique shape and interior services of motors such as motors and trains.

Product Description:The roof of the school's instructing buildings, gymnasiums, libraries and different structures can also use 1035mm galvanized roof panels.

Product Description:ST12 Galvanized Sheet, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandardGradeCSi

Product Description:In mining, such as the compartment of the mining dump truck, the rack of the crusher, etc., the material needs to have high strength and wear resistance, and the parts processed from the Q420 steel coil can be well adapted to the harsh working environment of the mine and improve the service life of the equipment.Product   Namecarbon steel  coilWall Thickness0.17mm-37mmWidth600mm-1250mmToleranceThickness:±0.03mm,   Width: ±50mm, Length: ±50mmMaterialA36,A53,ASTM   A106,JIS S400Q235B,Q235C,Q235D,Q345E,Q345,Q390B,Q390C,Q390D,Q390E,Q420,Q420B,Q420C,Q420DQ420

Product Description:It can be used to manufacture frame columns, frame beams and other main load-bearing components of high-rise buildings. The high strength of Q420GJ (C/D/E) can effectively carry the huge weight of the building and ensure the stability of the structure.

Product Description:2124 aluminum coil alloy factors are mostly copper, etc., after suitable warmth cure and processing technology, its tensile electricity ≥390MPa, conditional yield power ≥295MPa, with excessive bearing ability and deformation resistance, appropriate for events with excessive power requirements.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 60

Product Description:In the manufacture of navy equipment, such as missile casings, structural aspects of weapon systems, etc., 2004 aluminum rolls are used.

Product Description:The Q345GJ(B/C/D/E) Steel Angle is extensively used in frames and guide buildings of heavy equipment and building machinery.

Product Description:S320GD+Z Galvanized Steel Coils are engineered for superior strength and corrosion resistance. These coils boast a robust zinc coating that provides excellent protection against rust and atmospheric corrosion, making them suitable for a variety of construction and industrial applications where durability is key.

Product Description:3105 aluminum plate light weight, corrosion resistance, can be used for building roof and wall covering material, can effectively resist wind and rain erosion, extend the service life of the building, but also provide a certain heat insulation and waterproof performance.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustrial Pure Aluminum

Product Description:Q235GJ metal groove is basically composed of iron (Fe), however additionally carries carbon (C), silicon (Si), manganese (Mn) and different simple alloying elements. The highly low carbon content material helps to make certain the durability of the steel.

Product Description:In building doors and Windows, 5050 aluminum alloy corner materials are often used to make the frame and corner connection structure of doors and Windows. Its good corrosion resistance can resist the erosion of the external environment, ensure that doors and Windows will not rust corrosion in long-term use, and extend the service life.

Product Description:In the structural guide gadget of the constructing curtain wall, 5183 aluminum pipes can be used as guide pipes, beams and different components, with top energy and corrosion resistance, and can stand up to the weight of the curtain wall and wind loads, whilst displaying the splendor and trend of modern-day architecture.Product Specifications:Product NameAluminum Pipe TubeStandardAISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etcWall Thickness0.5-150 mm or Custom

Product Description:5052 aluminum alloy coil can be used to manufacture high-precision, high-strength die casting mold, injection mold and so on.

Product Description:It is appropriate for manufacturing the key elements of heavy equipment and equipment, such as rolling mill frame, mining equipment, engineering machinery, etc., which can meet the working necessities of gear beneath excessive load and excessive stress nationH-shaped steel dimensionslength1000-15000mm, according to customer requirementsthicknessWeb: 6-32mmWing: 6-40mmhigh200-1200mmcolorPainted, galvanized or as requiredMain componentsbaseCement and steel foundation boltsmain frameH beam/I beamsteel m

Product Description:In the manufacturing of auto parts, many body structure parts and interior trim parts of different shapes can be processed with DX51D steel, which can be accurately formed in the stamping process, and maintain good surface quality, reduce subsequent dressing procedures, and improve production efficiency.Full cold galvanizing process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality ins