23160 CA Bearing Sizes 300x500x160 Mm Spherical Roller Bearing -manufacture,factory,supplier from China

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

Outer spherical bearing with seat is a high-precision component product composed of greased sealed deep groove ball bearings and bearing seats of various shapes.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

Koyo tapered roller bearing is a common rolling bearing, usually used in automobiles, mechanical equipment, wind turbines and other fields.

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Tapered roller bearings are a type of bearing widely used in industrial fields. In the industry, tapered roller bearings are mainly used in machinery and automobiles, such as pharmaceutical equipment, hydraulic machinery, machine tools, automotive differentials, etc. These mechanical equipment are used in a mix of dynamic and static loads, there are different friction factors in the environment.

Ceramic materials have excellent wear resistance, corrosion resistance, high temperature resistance, low temperature resistance, high hardness, high strength, low expansion coefficient, electrical insulation, no magnetic conductivity and other excellent characteristics.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)706C–6176————0.006707C360177196————0.006708C360188227————0.014709C360199247————0.016723C360233104––––0.002724C360244135————0.014725C360255165————0.0047726C360266

Tapered roller bearings are suitable for bearing radial loads, unidirectional axial loads and radial and axial combined loads. The axial load capacity of tapered roller bearings depends on the contact Angle α, that is, the Angle of the outer ring raceway, the greater the contact Angle α, the greater the axial load capacity. Generally tapered roller bearings do not allow Angle errors, but the surface of the roller and raceway can be specially designed to allow 2'~4' Angle errors.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Categories:Rolling bearings: commonly found in truck transmission systems, such as tapered roller bearings, spherical roller bearings, etc.Plain bearings: common in the steering system of trucks, such as linear bearings, hydraulic bearings, etc.Three.Rolling bearings: By rolling the roller (ball or roller) between the inner ring and the outer ring, to achieve load transfer and reduce friction.Plain bearings: Through the oil film sliding between bearings, to achieve load support and reduce friction.Bearing NumberDimensions(mm)dDB566425.H195 80079293.8148135566426.H195 58107968125115566427.H195

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or dynamic loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error.Self-aligning roller bearings are divided into two different structures according to the roller cross section shape: symmetrical spherical roller bearings and asymmetric spherical roller bearings.

One of the biggest features of the needle roller bearing is the design of the needle roller. The needle roller has a smaller diameter than other types of rolling elements, so it can achieve a higher load carrying capacity in a limited space.

In addition to the quality and performance of the product itself, UBC bearings are also known for their excellent technical support and customer service. The company is equipped with a professional team composed of senior engineers and technical teams, able to provide customers with targeted solutions and technical support.

High temperature resistant bearing: The material itself has resistance to high temperature 1200 ℃, and good self-lubrication, tem- perature between 100℃ to 800℃ should not produce temperature difference caused by the expansion.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Product Description:5A06 aluminum rod has good thermal conductivity and can be used to manufacture heat sinks for electronic devices, such as computer CPU heat sinks and heat sinks for high-power electronic devices.

Product Description:6063 aluminum coils are used in the manufacture of train cars for components such as window frames, door frames, interior armrests and trim strips. Its corrosion resistance can be adapted to the environment of long-term train operation, including different climatic conditions and frequent cleaning operations.

(1)Linear motion bearing is a kind of low-cost metal for producing linear motion system, which is used for infinite stroke cylindrical shaft.. Because point contact ball bearing with shaft, so using the load is small.  (2) the flange linear bearing can be divided into: round flange type, method type, elliptical flange type, guided round flange, guiding method, guide the elliptical flange type, extended round flange type.(3)According to the specification is divided into two series of LM and LME series.

Product Description:PPGI Steel Coil is a pre-painted galvanized steel product known for its corrosion resistance and vibrant color options. It offers a cost-effective solution for applications requiring both strength and aesthetic appeal. With a wide range of coating types available, it is ideal for construction, architectural facades, and appliance manufacturing.

As a kind of high-quality and reliable auto parts, Koyo automotive hub bearings have superior technical performance and good market reputation. Whether in the automotive manufacturing process or in the after-sales maintenance link, the choice of Koyo bearings can provide customers with reliable support and protection, is an indispensable part of the automotive industry.

The main features of rotary support bearings include high bearing capacity, fast speed, small friction, wear resistance, simple structure, easy installation and so on. It can withstand large axial and radial loads, while having high rigidity and accuracy, suitable for high-speed rotation and precision positioning requirements. Different types of rotary support bearings have differences in structural form and working principle, such as four-point contact ball type, two-way thrust ball type, cross roller type, tapered roller type and so on.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.