2311 K Bearing-manufacture,factory,supplier from China

1. Centripetal needle roller and cage assembly (Type K)2, needle roller bearings with double locking rings (NA, NKI, RNA, NK)3. Single row needle roller bearing with double rib on outer ring (NA, NKI, RNA, NK)4, double row needle roller bearings with double guard (NA type, RNA type)5, stamped needle roller bearings (HK type, BK type)Note: This bearing has low cost, large bearing capacity, and is suitable for supporting structures with limited installation size. The journal surface is hardened as a rolling surface, and the bearing is pressed into the seat hole without axial positioning.

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Secondly, the rolling body is an important part of the flange bearing, the main role is to carry the load between the inner ring and the outer ring and reduce friction. Common rolling elements are steel balls, rollers, rollers, etc., and their number and size are determined according to the design and working requirements of the bearing, which can achieve efficient rotating motion.The cage is an assembly that connects the rolling elements and maintains the spacing between the rolling elements to ensure that they remain in relative position while in operation.

Koyo tapered roller bearing is a common rolling bearing, usually used in automobiles, mechanical equipment, wind turbines and other fields.

Product Description:The 6061-T6 Aluminum Pipe is a heat-treatable aluminum alloy known for its excellent mechanical properties, good corrosion resistance, and high strength-to-weight ratio.

FAG bearings-Deep groove ball bearings are the most popular of all ball bearing types because they have a variety of seals, dust caps, and stop ring arrangements to choose from. The groove of the bearing ferrule is an arc, slightly larger than the radius ball of the bearing ring.FAG bearings are a very famous brand.

Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.

There are two main types of bearings widely used in industrial robots: constant cross-section thin-walled bearings and RU cross roller bearings. The bearing of an industrial robot is one of the key components suitable for the joints of industrial robots or the turntables of machining centers, robots, medical devices, measuring instruments, IC manufacturing equipment, etc., and has a wide range of uses.

Loaders: Loaders are used to load and unload various materials, and their working conditions require the wear and impact resistance of bearings. Cylindrical roller bearings or bi-directional thrust ball bearings that are resistant to high speed work are usually used on loaders.Cranes: Cranes are used to lift and move heavy goods and are required to withstand high tensile and compressive loads.

Product Description:It plays an important role in the body and chassis manufacturing of commercial vehicles (such as trucks and buses).

Product Description:The density of 316 aluminum plate is relatively small, about 2.7g/cm³, which is much lighter than some steel and other metal materials, and has important application value in aerospace, automobile manufacturing and other industries that have strict requirements for weight.

Drive pinion: steeply angled tapered roller bearings, which reduce frictional moments and allow for increased rotational speeds.Hub Bearings – Rear Axle: Tapered roller bearings with an optimized internal design to limit edge loads caused by axle deflection and heavy loads.Hub bearing – front axle: Thin angular contact ball bearing improves rigidity in a narrow space.Gearboxes: High performance deep groove ball bearings TMB/TAB for increased service life or downsizing (downsizing) with the same service life as larger bearings.Final reduction planetary gears: There is a large selection of cage

Product Description:5A06 aluminum rod has good thermal conductivity and can be used to manufacture heat sinks for electronic devices, such as computer CPU heat sinks and heat sinks for high-power electronic devices.

Product Description:1mm feet galvanized roofing board is suitable for factories where the production process will produce a certain amount of heat and humidity, such as food processing plants, textile factories, etc.

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Product Description:The S275 carbon steel coil is made of rolled steel. This roll form is easy to store and transport and takes up relatively little space.

Product Description:The S235JR has a low carbon steel content and can be used in some non-critical parts of the vehicle, such as the interior panel of the carriage, spare tire frame, etc.

Product Description:In automation equipment, such as the shell of the robot, the panel of the industrial automation control cabinet, etc., the application of 3003 aluminum alloy coil can improve the beauty and durability of the equipment, while reducing the overall weight of the equipment, and facilitate the installation and movement of the equipment.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T f

We are an authorized dealer of KOYO bearings. KOYO is a leading manufacturer of almost all types of bearings. We offer a full range of KOYO bearings at very competitive prices, including koyo wheel bearings, koyo ball bearings, koyo needle bearings, koyo roller bearings, koyo thrust bearings and koyo eccentric bearings.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.