23044 CC Double Row Spherical Roller Bearings-manufacture,factory,supplier from China

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

Single row tapered roller bearing is a common rolling bearing, which is composed of an inner ring, an outer ring, a roller and a cage. Its structure is similar to a conical shape, which is why it gets its name.The contact points on the inner and outer rings are conical and suitable for bearing large loads in both radial and axial directions.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Double row deep groove ball bearing:Design: With two balls, these bearings can handle a higher load capacity than a single row of bearings.Application: They are suitable for bearing arrangements where the bearing capacity of a single row of bearings is insufficient, for example in heavy industry applications.Features: Double-row bearings are slightly wider than single-row bearings, but offer better load distribution and improved reliability for demanding applications.Both single-row and double-row boring deep groove ball bearings are designed with high-quality materials to ensure durability an

Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.

Cam Follower Needle Roller Bearings are also referred to as track follower. They are designed to follow a sliding or rotating piece (cam) and they use rollers or needles as the rolling elements. Cam Follower Bearings are therefore able to replicate a specific motion because they are highly versatile. They have thick-walled outer rings that run on a track.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

Flange linear bearing is a common mechanical component, and its role is very important. Its main function is to support and guide two parts in relative motion, so that they can move smoothly with each other. At the same time, it can also withstand the load and torque from these moving parts to ensure the normal operation of the mechanical system.First of all, flanged linear bearings play a supporting role in mechanical equipment. It can withstand gravity and other loads perpendicular to the axis to ensure the stability and reliability of the parts to be supported.

Product Description:The 10-foot galvanized roofing sheet, which is 10 feet long, provides a large coverage area after installation and reduces splicing, thus enhancing the integrity and stability of the roof structure.

The important measure to reduce automobile fuel consumption is to design low friction torque hub bearings, and the main factors affecting the bearing friction torque is the type of bearing and preload, and the bearing seal accounted for a large proportion of the friction torque components. Therefore, improving the seal design to reduce the friction torque can significantly improve the performance of hub bearings.

Product Description:DX51D galvanized steel sheet is a commonly used low carbon steel material, easy to carry out a variety of cold processing operations, such as cold rolling, cold bending, stamping and so on.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

In industrial manufacturing and various mechanical equipment, rolling bearings with seats are widely used in heavy machinery, automobiles, aerospace, railway traffic and other fields. For example, in the automotive industry, rolling bearings with seats are used in engines, transmissions, steering systems and other components to support and transmit rotating forces.

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

Product Description:The manufacture of mechanical support and base is an important application of A36 carbon steel coil in mechanical manufacturing. For example, the base of the machine tool, the chassis support of the construction machinery, etc., need enough strength to support the weight of the equipment and withstand various forces during the work process.

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

Structural features: The roller inside the cross roller bearing is combined in a cross arrangement, which makes the bearing able to withstand both radial and axial loads. There is a certain gap between the inner and outer rings, which can make the bearing maintain high rigidity when it is subjected to high torque load, and also has good rotation accuracy and stability. The design of the seal ring and cage of the cross roller bearing is also very important, which can effectively prevent dust and foreign matter from entering the bearing interior and extend its service life.

According to the different requirements of bearings and bearing seats, the classification of bearing seats is not exactly the same, and it is necessary to carefully check the selection according to the design when using.1 Classification according to the shape of the bearing seat:1.1 Outer spherical bearing with seat, also known as bearing unit (SKF). When there is no bearing, it is called the outer spherical bearing seat. 1.1.1.1 The outer spherical bearing seat is divided into 200 series according to the bearing series. The 500 series. The 300 Series. The 600 Series.

Product Description:Because of its strength and good plasticity, hot rolled low carbon steel coil can withstand various loads in building structures, and is widely used in the construction industry to make various building structural parts, such as steel beams, steel columns, roof trusses and so on.

Product Description:5mm galvanized steel plate, this thickness can provide more considerable structural strength, can withstand greater pressure, tension and shear force, in the field of construction can be used as load-bearing components, such as building beams, columns and other secondary structural components, can effectively bear and transfer the load; In industrial manufacturing, it can be used to manufacture equipment shells, chassis, brackets, etc.