22313 CC Spherical Roller Bearing-manufacture,factory,supplier from China

Outer spherical bearing with seat is a high-precision component product composed of greased sealed deep groove ball bearings and bearing seats of various shapes.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or dynamic loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error.Self-aligning roller bearings are divided into two different structures according to the roller cross section shape: symmetrical spherical roller bearings and asymmetric spherical roller bearings.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

NACHl's self-aligning roller bearings are a common and important industrial part, widely used in a variety of mechanical equipment and construction machinery. It is mainly composed of an outer ring, an inner ring, a roller, a cage and other components, and supports the rotating and swinging shaft through rolling friction. Aligning roller bearing has large radial load capacity and high axial load capacity, as well as excellent self-aligning performance, and can adapt to the relative tilt and axial change between shaft and seat when working.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

Stainless steel band seat bearings are applied by stainless steel outer spherical bearings combined with stainless steel bearing seats.

Railway Axle BearingsAxle bearings: tapered roller bearings, tapered roller bearing boxes, cylindrical roller bearings, spherical roller bearings. Railway axle bearings can be subjected to high shocks and loads. Mounting space is also limited, so in many cases compact, double-row bearings with high load ratings are used.Railway Axle Box BearingAxlebox bearings should have a large load carrying capacity, be able to resist shock vibration, and must have a high life expectancy, safety and reliability, smaller size and quality.

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

Spruce develops and supplies a wide range of axles, drive units and traction motor bearings for railway rolling stock. These bearings feature high performance, high reliability and long-term maintenance-free service to support railway companies in providing fast, safe and reliable transport.Axle bearings: tapered roller bearings, tapered roller bearing cartridge, cylindrical roller bearings, spherical roller bearings.Railway axle bearings are subjected to heavy impacts and loads.

Structural features: The roller inside the cross roller bearing is combined in a cross arrangement, which makes the bearing able to withstand both radial and axial loads. There is a certain gap between the inner and outer rings, which can make the bearing maintain high rigidity when it is subjected to high torque load, and also has good rotation accuracy and stability. The design of the seal ring and cage of the cross roller bearing is also very important, which can effectively prevent dust and foreign matter from entering the bearing interior and extend its service life.

Linear motion bearings have the characterized of smooth movement,low friction,high rigidity and long life span,economical and easy to maintain or replaceMotorized linear slides such as machine slides, XY tables, roller tables and some dovetail slides are bearings moved by drive mechanisms. Not all linear slides are motorized, and non-motorized dovetail slides, ball bearing slides and roller slides provide low-friction linear movement for equipment powered by inertia or by hand.

Single Row Angular Contact BearingsThese single row angular contact bearings are suitable for general use where axial loads are applied in only one direction. They are stand-alone bearings and are not designed to be combined or mated with another bearing.Double Angular Contact BearingsDuplex bearings are two matched bearings that provide precise alignment both radially and axially. By using duplex bearings, vibrations can be eliminated and higher load capacities can be achieved.

High load carrying capacity    The cage bars are displaced relative to the roller pitch diameter to enable the rollers to be placed closer to each other, creating room for additional rollers  High stiffness    The increased number of rollers increases radial stiffness.    High speed capabilityThe cage designs are suitable for high speeds, rapid accelerations and peak loads.  Long service life  The black oxide coating of rings and rollers (designation suffix L4B) contributes to extended service life by improving:     

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

The important construction modes of the turntable bearing seat are: four-point contact ball bearing seat, double-row angular contact thrust ball bearing seat, interpenetrating cylindrical roller bearing seat, interpenetrating tapered roller bearing seat, and three-row cylindrical roller with turntable bearing seat.According to whether the gear can be carried and the spread of the gear is divided into: toothless, external or internal gear and other different structures.The four-point contact ball turntable bearing seat has a higher static bearing capacity, the interspersed cylindrical roller be

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Features: Railway bearings have the characteristics of high bearing capacity, wear resistance, impact resistance, high temperature resistance, long life and so on.

Construction machinery bearings are widely used in various products. The following are some common construction machinery products and their bearing applications:Excavators: Excavators are heavy construction machinery used to excavate earth, stone or other materials, which cover a variety of working conditions and load requirements. Roller bearings or plain bearings that work at high loads and high speeds are usually used on excavators.Bulldozers: Bulldozers are used to bulldoze land, fill earth or push other materials, and need to withstand a large pushing force.

The main features of rotary support bearings include high bearing capacity, fast speed, small friction, wear resistance, simple structure, easy installation and so on. It can withstand large axial and radial loads, while having high rigidity and accuracy, suitable for high-speed rotation and precision positioning requirements. Different types of rotary support bearings have differences in structural form and working principle, such as four-point contact ball type, two-way thrust ball type, cross roller type, tapered roller type and so on.

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Heavy goods vehicles are short for heavy trucks, and the working environment of heavy trucks is more severe and the load is greater than that of small household cars.