2209 K Bearing-manufacture,factory,supplier from China

1. Centripetal needle roller and cage assembly (Type K)2, needle roller bearings with double locking rings (NA, NKI, RNA, NK)3. Single row needle roller bearing with double rib on outer ring (NA, NKI, RNA, NK)4, double row needle roller bearings with double guard (NA type, RNA type)5, stamped needle roller bearings (HK type, BK type)Note: This bearing has low cost, large bearing capacity, and is suitable for supporting structures with limited installation size. The journal surface is hardened as a rolling surface, and the bearing is pressed into the seat hole without axial positioning.

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

Rotary support bearings are widely used in various mechanical equipment and construction machinery, such as cranes, rotary tables, machine tools, wind power equipment, drilling RIGS, excavators and so on. In these equipment, the rotary support bearing assumes the important role of supporting the rotating member, ensuring the normal operation of the equipment. At the same time, it is also widely used in high-end fields such as aerospace, ocean engineering, and automated production lines.

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

Features: Railway bearings have the characteristics of high bearing capacity, wear resistance, impact resistance, high temperature resistance, long life and so on.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

This type of bearing is widely used in industrial automatic robots, working machinery and medical facilities, where high rigidity, tightness and high speed are required to ensure accuracy.

Secondly, the rolling body is an important part of the flange bearing, the main role is to carry the load between the inner ring and the outer ring and reduce friction. Common rolling elements are steel balls, rollers, rollers, etc., and their number and size are determined according to the design and working requirements of the bearing, which can achieve efficient rotating motion.The cage is an assembly that connects the rolling elements and maintains the spacing between the rolling elements to ensure that they remain in relative position while in operation.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

Product Description:The DX53D substrate has a lower carbon content than the DC01 substrate used in the DX51D+Z galvanized steel sheet.

Cam Follower Bearings are additionally referred to as tune follower. They are designed to comply with a sliding or rotating piece (cam) and they use rollers or needles as the rolling elements. Cam Follower Bearings are consequently in a position to replicate a unique action due to the fact they are exceptionally versatile. They have thick-walled outer rings that run on a track.

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

In railway applications, bearings need to comply with several customer requirements. These include the need for reliability, extended maintenance intervals, space-saving design capabilities and more.We offer solutions for a wide range of wheelset designs for all kinds of railway rolling stock.

As a kind of high-precision, high-strength, high-speed parts, automobile bearings have an absolute linking role, especially in the automobile chassis, engine, gearbox, brake disc, suspension, etc. There are a lot of bearings, so the life expectancy And quality is also a topic of concern to most people.After all, driving safety is more than everything. As a mainstream trend now, new energy vehicles are naturally very concerned about lightweight bearings.Bearings of new technology have also put forward new standards for high temperature resistance, high speed and light weight.

The process has been continuously improved, and in insulated bearings, there is a coating 100μm thick on the surface of the outer or inner ring, which can withstand voltages up to 1000 V DC.

The standard drive system for stud CAM follower is usually a slot, suitable for flat head screwdrivers. However, for some special cases, such as eccentric CAM follower or where higher torque capacity is required, the socket can also be used in the drive system. The hex socket has a larger contact area and can withstand greater torque, so it is very useful for some applications with higher loads, especially for those that need to be driven in blind holes.

Product Description:The 1100 Aluminum Pipe is a commercially pure aluminum product, containing a minimum of 99.0% aluminum.

Auto Wheel Hub Bearing 90366-T0031 KOYO STA5383 automotive bearing STA5383 LFT for HILUXKOYO brand STA5383 automotive bearing STA5383LFT Tapered Roller Bearing STA 5383 LFTTapered roller bearings consist of four basic components including: the cone (inner ring), the cup (outer ring), tapered rollers, and a cage (roller retainer). The cone, cup and rollers carry the load while the cage spaces and retains the rollers on the cone. The cone, rollers and cage components of our tapered roller bearings are referred to as the cone assembly.

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

Flange slide bearing has the features of Low friction coefficients and long usage spans, High temperature, self-lubricated, anti-corrosion. Using feature: Linear bearings are used widely in electronic equipment, pull tester and digital three-dimensional coordinate measuring device.  Such as precision equipment, as well as multi-axis machine tools, press tool, grinder automatic gas cutting machine, printer, card sorting machine, food packaging machine and other industrial machinery sliding components...

Product Description:The 7075-T6 Aluminum Pipe is a high-strength, heat-treatable alloy known for its exceptional mechanical properties and versatility across demanding industries.

Product Description:5052 aluminum alloy coil can be used to manufacture high-precision, high-strength die casting mold, injection mold and so on.

Tapered roller bearings are widely used in various mechanical fields, such as automobiles, aviation, machine tools, etc., because of its large bearing capacity, high precision, good reliability and other advantages, it has been widely concerned and applied in the industrial field.

The single-row four-point contact ball slewing bearing has the characteristics of compact structure and light weight, which makes it widely used in construction machinery. Because the steel ball and the circular raceway contact at four points, this support can bear axial force, radial force and heeling moment at the same time, with high bearing capacity and stability. Applicable scope includes rotary conveyor, welding operator, small and medium-sized cranes, excavators and other construction machinery, is a multi-functional, efficient slewing support structure.