1020 steel sheet-manufacture,factory,supplier from China

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.

Product Description:The base plate of HDG Steel Coil (hot-dip galvanized steel coil) is usually cold-rolled steel sheet or steel strip. HDG steel coil thickness range is wide, generally from 0.3mm-3.0mm between.

Product Description:DX51D galvanized steel sheet is a commonly used low carbon steel material, easy to carry out a variety of cold processing operations, such as cold rolling, cold bending, stamping and so on.

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:The DX53D substrate has a lower carbon content than the DC01 substrate used in the DX51D+Z galvanized steel sheet.

Product Description:The 10-foot galvanized roofing sheet, which is 10 feet long, provides a large coverage area after installation and reduces splicing, thus enhancing the integrity and stability of the roof structure.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Product Description:The relatively low carbon content of Q295A steel makes the steel have good welding performance, which is convenient for site construction, and can be used to make the frame structure of the workshop, such as beams, columns, etc., and quickly build the main structure of the workshop.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283   Gr.A,.Gr.B.Gr.C,A285 Gr.A,.Gr.B.Gr.C,Q235,Q195,Q215,Q34

Product Description:3005 Aluminum plate thickness range is wide, from sheet to thick plate. Thin sheets can be used to manufacture products with thinner thickness requirements, such as barrier layers for food packaging (if they meet food grade standards), shielding layers for electronic devices, etc.

Product Description:The thickness of the zinc layer of the half-inch galvanized steel sheet can reach about 50-100 microns per side, which makes it able to withstand external forces such as pressure, impact force and shear force, and is suitable for engineering projects and industrial applications with high material strength requirements.Product Manufacturing Process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → dryin

Stainless steel band seat bearings are applied by stainless steel outer spherical bearings combined with stainless steel bearing seats.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.

Product Description:A36 carbon steel is a kind of low carbon steel, with good toughness, can withstand a certain impact and dynamic load, will not easily brittle fracture. Widely used in building structure frame, such as beams, columns and so on.

Product Description:The aluminum sheet is 0.5 inches thick, which is a relatively thick specification among many aluminum sheet products, and has a strong structural load capacity.

Product Description:The yield strength of AH36 carbon steel is not less than 355MPa, and the tensile strength is between 490-620 mpa.

Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.

Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.

Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.

Product Description:The main performance advantage of EG steel coil is good corrosion resistance and stamping performance, and the zinc layer can play a lubricating role to a certain extent, which is conducive to the forming of steel.

Product Description:The S235JR has a low carbon steel content and can be used in some non-critical parts of the vehicle, such as the interior panel of the carriage, spare tire frame, etc.

Spruce develops and supplies a wide range of axles, drive units and traction motor bearings for railway rolling stock. These bearings feature high performance, high reliability and long-term maintenance-free service to support railway companies in providing fast, safe and reliable transport.Axle bearings: tapered roller bearings, tapered roller bearing cartridge, cylindrical roller bearings, spherical roller bearings.Railway axle bearings are subjected to heavy impacts and loads.

In addition to the quality and performance of the product itself, UBC bearings are also known for their excellent technical support and customer service. The company is equipped with a professional team composed of senior engineers and technical teams, able to provide customers with targeted solutions and technical support.