1 8 inch aluminum sheet-manufacture,factory,supplier from China

Product Description:The aluminum sheet is 1/8 inch thick (about 3.175 mm). This thickness gives it a certain degree of robustness, suitable for a variety of applications requiring a certain degree of structural strength. Decorative panels that can be used for building facades can reduce the load of building structures due to their light weight and easy installation.

Product Description:4/8 galvanized steel plate is a half-inch galvanized steel plate, which has high yield strength and tensile strength, and can withstand large tensile, compression and bending forces and is not easy to deformation.

Product Description:The thickness of the zinc layer of the half-inch galvanized steel sheet can reach about 50-100 microns per side, which makes it able to withstand external forces such as pressure, impact force and shear force, and is suitable for engineering projects and industrial applications with high material strength requirements.Product Manufacturing Process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → dryin

Product Description:The quarter-inch galvanized steel plate is based on high-quality steel, usually low or medium carbon steel.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Product Description:3005 Aluminum plate thickness range is wide, from sheet to thick plate. Thin sheets can be used to manufacture products with thinner thickness requirements, such as barrier layers for food packaging (if they meet food grade standards), shielding layers for electronic devices, etc.

Product Description:3004 aluminum coil is extensively used in the manufacture of quite a number liquid containers, such as beverage cans, gas tanks, gas or lubricating oil pipes, etc., the use of its properly corrosion resistance and processing properties, can make certain the sealing and provider lifestyles of the container.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8

Product Description:5052 aluminum alloy coil can be used to manufacture high-precision, high-strength die casting mold, injection mold and so on.

Product Description:Hdp Steel Coil refers to the High-Durability Polyester coated steel coil. It is based on cold-rolled steel plate or galvanized steel plate and coated with high durability polyester coating on the surface.

Product Description:Our 2.5mm Galvanized Steel Coils are crafted with meticulous craftsmanship and cutting - edge technology. The ultra - thick, premium - grade zinc coating provides supreme corrosion resistance, making them the indisputable choice for the most harsh and unforgiving environments. These coils are specifically designed for massive infrastructure endeavors like large - scale port construction, huge - capacity industrial liquid storage tanks, and extra - heavy - duty mining and construction machinery.

Product Description:Our 0.5mm Galvanized Steel Coils are crafted with precision and care. The thick, high - grade zinc coating offers superior corrosion protection, making them perfect for harsh environments. Ideal applications include industrial building structures, large - capacity storage tanks, and heavy - duty machinery components. The 0.5mm thickness provides remarkable strength and rigidity, while still allowing for relatively easy forming. Under strict quality assurance, these coils ensure consistent, reliable performance over an extended lifespan.

Product Description:SGCD3 is a specific cold-rolled substrate galvanized steel material, suitable for the manufacture of complex shapes and high precision parts.

Product Description:In the accepted atmospheric environment, Q420 (A/B/C/D/E) I-steel has excellent corrosion resistance, can face up to oxidation and rust, and lengthen the carrier life.

Product Description:The corrosion resistance of 5082 aluminum profile makes it very suitable for the manufacture of ship hull structures, such as ship plates, keels and other components.

Product Description:The good seawater corrosion resistance of 5A03 aluminum plate makes it very suitable for the manufacture of hull shell, deck, bulkhead and other structural parts, which can maintain stable performance in long-term contact with seawater environment and extend the service life of the hull.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustr

Product Description:Aluminized steel coil has good processability. It can carry out stamping, bending, cutting and other mechanical processing operations. During the stamping process, the aluminum plating layer can maintain good integrity and will not flake off easily.

Product Description:Screen plate making for vibrating screen. In the procedure of ore screening, the sieve plate ought to now not solely undergo the weight of the ore, however additionally face up to the general friction and have an effect on of the ore.

Product Description:Mainly used for constructing buildings with excessive metal overall performance necessities and some massive engineering structural parts, such as:High-rise buildings: Used for key load-bearing elements such as beams and columns in high-rise buildings, which can efficiently raise the weight of constructions and enhance seismic performance.Large-span structure: metal shape components such as large-span stadiums, airports, exhibition centers, etc., can make

Product Description: In the building of industrial plants, it is used for roof truss, crane beam and different structures.

Product Description:It is an vital cloth for the body shape of industrial plants, and can be used to manufacture the essential load-bearing factors such as columns and beams of plants.

Product Description:With its hardness between 440-480HBW, NM480 carbon metal plate can efficaciously withstand friction and put on in working environments with greater extreme wear, such as ore processing, constructing substances transportation and different scenarios, appreciably extending the carrier existence of gear components.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A

Product Description:NM360 Carbon Steel Plate with good toughness, can withstand a certain impact and dynamic load, will not easily brittle fracture. Widely used in building structure frame, such as beams, columns and so on.

Product Description:In the chemical industry, electric power and other industrial fields, many pipes used to transport various industrial media are also made of carbon steel rolls.

Product Description:Because of its electricity and true plasticity, warm rolled low carbon metal coil can face up to quite a number masses in constructing structures, and is extensively used in the building enterprise to make a range of constructing structural parts, such as metal beams, metal columns, roof trusses and so on.